Self Adhesive Waterproofing Membrane

Approx. Rs 2,450 / RollGet Latest Price

CLEXOSELF-SBS is a COLD appllied self-adhesive bituminous sheet waterproofing membrane specially for-mulated for hot and tropical climate. It is based on a SBS modified bitumen compound laminated on one side with HDPE film and protected on self adhesive side with a release liner.
PROPERTIES

Cold applied and self adhesive (no heating or open flames required)

Fully bonded sheets.

Fast and secure application without special equipment.

High elongation , flexibility & easy application.

High tensile strength , tear and puncture resistance.

Resistant to aggressive mediums in natural ground water and soil.

Capable of withstanding thermal movements.

AREAS OF USE

CLEXOSELF-SBS is the ideal membrane for damp-proofing foundations, bridges, viaducts and tunnels, coaches etc. It is a cold and post-applied self adhesive waterproofing membrane sheet. Application for protection of various substrates like concrete, GL sheets , wood etc. in wide range of uses:

External application for cut & cover tunnels.

On horizontal slabs and protrusions

On the outside of external wall

On single and strip foundation or slabs

Roof gardens where resistance to root is not required.

Can be laid on any type GI. Aluminum and asbestos corrugated sheets due to stick on

application.

Basement & raft slabs.

Medium to large roof slabs (domestic, commercial and industrial)

HEALTH & SAFETY
Avoid prolonged contact with eyes and skin.
Protective clothing such as gloves and goggles should be worn. See the relevant material safety data sheet for more information.
PACKING & STORAGE
CLEXOSELF-SBS is available in (1mtr W x 15mtr L) :
SIZE (WIDTH X LENGTH)WEIGHT (KG/SQM)THICKNESS(MM)REINFORCEMENT(1M X 15M)2.3 kg/sqm1.5 mmGLASS FIBER/NWPOLYESTER/CL-HDP(1M X 15M)2.8 kg/sqm2.0 mmGLASS FIBER/NWPOLYESTER/CL-HDP
Shelf life is 12 months in unopened condition rolls. Store containers in a clean dry area protected from Direct sunlight and extreme heat and cold.

Additional Information:

Approx. Rs 290 / Square MeterGet Latest Price

CLEXOSILVER-SBS is a cold applied self-adhesive sheet membrane comprising of a Tropical Grade polymer modified bitumen membrane.

It is highly elastic solar reflective bituminous compound, reinforced with 45 GSM Glass fiber/160 GSM Polyester line and Topped up with 30 Micron Colored Aluminum Foil.

·  Cold applied and self adhesive (no heating or open flames required)

·  Fully bonded sheets.

·  Aluminum surfacing  with Excellent UV Rays Reflection.

·  Fast and secure application without special equipment.

·  High elongation, flexibility & easy application.

·  High tensile strength , tear and puncture resistance.

·  Capable of withstanding thermal movements.       ENEFITS

CLEXOSILVER-SBS is the ideal membrane for damp-proofing foundations, bridges, viaducts and tunnels, coaches etc. It is a cold and post-applied self adhesive waterproofing membrane sheet. Application for protection of various substrates like concrete, GI sheets, wood etc. in wide range of uses:

o   External application for cut & cover tunnels.

o   On horizontal slabs and protrusions o On the outside of external wall

o   On single and strip foundation or slabs

o   Roof gardens where resistance to root is not required.

o   Can be laid on any type GI. Aluminum and asbestos corrugated sheets due to stick on application.

o   Basement & raft slabs. o Medium to large roof slabs (domestic, commercial and industrial)

The application temperature should be between 5°C to 50°C. Application procedures may vary slightly depending upon site conditions. The general recommended guidelines for the application of the waterproofing system are as follows:

Surface preparation

Concrete surfaces should be float finished and free from cavi-ties and projecting nibs. All surfaces shall be dry and free from frost, surface laitance and contamination.

Priming

CLEXODAM-PRIME must be applied to the substrate and al- lowed to dry until it is tack free, prior to the application of the membrane. All surfaces must be re-primed if left for more than 24 hours prior to the application of CLEXOSILVER-SBS.

             Application

Smooth transition should be made at wall/floor slab junctions using a sand/cement.

The membrane should be applied to the substrate having first removed the siliconised release paper, pressing the polyethylene film firmly ensuring that the adhesive. Bitumen compound bonds continuously to the substrate with no air pockets.

Allow at least a 75mm edge and a 150mm end lap. All laps should be rolled firmly to achieve a good seal. End laps should be staggered.

On vertical or inclined surfaces, the membrane shall be laid from the lowest level upwards.

The membrane should be protected immediately after application in accordance with BS 8102: 1990 by using Protection Board or as appropriate with a sand/cement screed.

              Limitations

              Application temperature range: 5^oC - 50^oC.

For application below 15^oC it may be necessary to slightly warm the back of the membrane should be stored at temperatures.

Above 20^oC prior to application to facilitate ease of application and immediate bond to the substrate.

Wash all the tools and tackles with industrial solvent immediately after the application is completed.

Additional Information: