Ghaziabad, Uttar Pradesh
GST No. 09AAKCC6695G1Z3
Approx. Rs 350 / Square MeterGet Latest Price
Product Details:Minimum Order Quantity | 100 Square Meter |
Service Location | PAN INDIA |
Method-1
PRIMING
If substrate is porous, it is best to use CLEXOCRETE-CWC PRIMER Penetrating Primer prior to CLEXOELAST-LCB/LCW application.
APPLICATION & CLEANING OF TOOLS
CLEXOELAST-LCB/LCW can be applied by spray or brush, embedding glass fiber scrim in areas which require reinforcement. Allow to dry and apply another coat to give an overall consumption of approximately 1.2-1.6kg/m2. Do not apply if rain is threatening, as CLEXOELAST-LCB/LCW is not resistant to rain until fully dry.
Recommended: - 2-3 Coats
Clean tools and equipment with water after use.
DETAILED APPLICATION PROCEDURE
· Prime the surface with CLEXOELAST-LCB PRIMER. In Ration, (1kgs CLEXOELAST-LCB/LCW: 1kgs Water) @0.15-0.2kgs/Sqmt/Coat.
· After the primer coat is completely dried apply three coats of CLEXOELAST-LCB/LCW. It is recommended to apply the 2-3 coats after the previous coat is totally cured. @ 0.5kgs/Sqmt/Coat.
· For better results use CLEXO GLASS FIBRE MESH/REINFORCEMENT embedded into 1st coat of CLEXOELAST-LCB/LCW while still wet.
· CLEXOELAST-LCB/LCW could be diluted up till 10 – 15% for 1st coat & 2nd coat and 5 – 10 % for 3rd coat to make material workable and get the desired coverage.
All brushes and tools should be cleaned by water immediately after useAdditional Information:
Explore More Products
© Clexo Engineering And Chemicals Private Limited. All Rights Reserved (Terms of Use)
Developed and Managed by IndiaMART InterMESH Limited