Waterproofing Coating

Approx. Rs 120 / KgGet Latest Price

CLEXOCRETE-CWC is an acrylic based polymer modified cementitious waterproofing system. it can be used as a waterproofing membrane for terraces, balconies and roof slabs. Mortar modified with CLEXOCRETE-CWC has improved physical strength, and superior adhesion to old concrete, masonry, brick, and many other surface. When mixed with cement will provide the unique solution to all problems related to water leakage and protects from severe fungus, salt penetration, or environmental attack.

• CLEXOCRETE-CWC increases the plasticity of concrete and cement.
• Provides a tough and hard surface with waterproofing.
• Resistant to salt penetration.
• Resistant to UV rays, mild acids to strong alkalis.
• Non health hazards to workmen.
• Can be applied on horizontal as well as vertical surfaces.

• Bathroom and any floor to dampness
• Water tank or swimming pools
• General concrete repair
• It can be used for protection of concrete against corrosion, salt attack, etc.
• Waterproofing of basements, toilet, terraces, roof, bridge decks etc.

As with all chemicals, caution should always be exercised. avoid prolonged contact with eyes and skin.

Protective clothing such as gloves and goggles should be worn. See the relevant material safety data sheet for more information.

CLEXOCRETE-CWC is available in 1kg, 20kg, 50kg, and 200kg, containers.

Shelf life is 12 months in unpinned container. store containers in a clean dry area protected from direct Sunlight and extreme heat and cold.

Additional Information:

Approx. Rs 190 / KgGet Latest Price

CLEXOELAST-LCB
  is a single component liquid applied coating. CLEXOELAST-LCB is high performance waterproofing liquid coating that dries to form a tough and flexible impermeable coating. CLEXOELAST-LCB is a cold applied liquid waterproofing membrane. Specially designed from a blend of special resin and rubber reinforced with special water-repelling filler it is a blend of tropical grade bitumen emulsion with modification using pure acrylic polymer.

Properties

Single Component, Cold Applied and Highly Elongation Rubber like Membrane.

No mixing or heating required. Save labour coat.

Highly Resistance to oxidation, UV & ozone.

Fast drying, easy to apply by brush, spray or rollers and High flexibility.

Ensures durable bond & resists peeling, and chipping hence lasts longer.

Excellent crack bridging capacity up to 2mm width.

Structure life and durability is increased.

Leading to early completion and time saving.

Lightweight coating with joint free seal.

Areas of Use

CLEXOELAST-LCB applied for waterproofing of roof slabs, terraces, balconies, sun shades, parapet walls, etc.

Suitable for horizontal and vertical wells.

CLEXOELAST-LCB is optimally suitable for application on structures having complicated geometry like domes, arches, shells, folded, plates, paraboloids, corrugated sheets, etc.

Useful on concrete terrace gardens, swimming polls, basements, metal, plastic, etc.

Excellent crack bridging capacity upto 2mm width.

HEALTH & SAFETY

As with all chemicals, caution should always be exercised. avoid prolonged contact with eyes and skin.

Protective clothing such as gloves and goggles should be worn. See the relevant material safety data sheet for more information.

PACKING & STORAGE

CLEXOELAST-LCB is available in 5kg & 20kg plastic pails.

Shelf life is 12 months in unpinned container. store containers in a clean dry area protected from direct Sunlight and extreme heat and cold.

Additional Information:

Approx. Rs 190 / LitreGet Latest Price

CLEXOELAST-LCW is a one pack roof coating. It is a single component liquid applied coating. CLEXOELAST-LCW is a special synthetic resin-based waterproofing coating. because of its excellent flexibility and thixotropic nature coating with weather resistance. its applied by brush or spray and after drying can be walked upon uncovered in special case. It cures on exposure to the atmosphere and forms an elastomeric seamless membrane.
PROPERTIES
CLEXOELAST-LCW is a white Coating, It offers excellent UV Resistance & solar reflective. it is a blend of weather resistant pigments. Gives a cooling effect due to the reflective properties. Fillers and acrylic resins with the following properties:

Single Component, Cold Applied and Highly Elastic Rubber Like Membrane.

Waterproofing and weatherproof coating.

Superior wetting and adhesion properties.

Fast drying, easy to use and High flexibility.

No heating or no mixing required.

Unique Additive are added to make it durable.

Structure life and durability is increased.

Leading to early completion and time saving.

Lightweight coating with joint less.

AREAS OF USE

CLEXOELAST-LCW applied for waterproofing of roof slabs, terraces, balconies, sun shades, parapet walls, etc.

Suitable for horizontal and vertical wells.

HEALTH & SAFETY
As with all chemicals, caution should always be exercised. avoid prolonged contact with eyes and skin.
Protective clothing such as gloves and goggles should be worn. See the relevant material safety data sheet for more information.
PACKING & STORAGE
CLEXOELAST-LCW is available in 5kg & 20kg plastic pails.
Shelf life is 12 months in unpinned container. store containers in a clean dry area protected from direct Sunlight and extreme heat and cold.

Additional Information:

Approx. Rs 80 / KgGet Latest Price

CLEXOBOND-2K is a two component cementitious & acrylic polymer-based flexible waterproofing & protective coating made up of the best quality Portland cement, properly selected & graded aggregates additives & acrylic emulsion polymer as a binder. It is a simple apply by brush, roller and once dry it forms a strong flexible waterproof coating. This coating cures to form elastomeric waterproofing membrane with excellent adhesion to cementitious surfaces.PROPERTIESCLEXOBOND-2K is supplied a two component, powder (cement base) and resin (acrylic based) system to be mixed on site, with the following properties:Withstands high positive hydrostatic pressure and negative pressure.Highly durable and UV tolerant.Excellent bond strength to porous and non-porous concrete surfaces.Excellent resistance to ingress of water.It is a food grade coating, Can be used for treatment in potable water tank.Non toxic .Can be applied to green concrete.Seamless coating.Waterproofing under terrazzo or tiles floors shower pen, kitchen, laundry and bathroom floors.AREAS OF USEBasements, foundation protection.Raft, sunken areas.Retaining wall roof slabs.Such as parking decks and roof decks.General concrete repair.Waterproofing roof coating.Protection of concrete from sea water.HEALTH & SAFETYAs with all chemicals, caution should always be exercised. avoid prolonged contact with eyes and skin.Protective clothing such as gloves and goggles should be worn. See the relevant material safety data sheet for more information.PACKING & STORAGECLEXOBOND-2K Part A is available in 32kg paper bags.CLEXOBOND-2K PART B is available in 20kg pails.Shelf life is 12 months in unpinned container. store containers in a clean dry area protected from direct Sunlight and extreme heat and cold.

Additional Information:

Approx. Rs 200 / LitreGet Latest Price

clexocool-coat coating system is a revolutionary, field applied, infrared heat-reflective coating specifically designed for roof/terrace, basements, metal roof , tiles roof and wall surfaces. It''s a specially designed single part, pollution free liquid heat reflective roof insulation & waterproofing coating based on special synthetic resin. It offers superior uv resistance and high solar reflective. Clexocool-coat helps achieving reduction of 10-15 °c in interior temperature.

• easy to apply.
• providing insulation or cooling effect
• seamless, tough, flexible elastic coating.
• light weight coating.
• highly solar reflective coating.
• unique additives added to make it durable.
• highly resistance to oxidation, uv & ozone.
• high & effective thermal effciency.

avoid prolonged contact with eyes and skin. Protective clothing such as gloves and goggles should be worn. See the relevant material safety data sheet for more information.

clexocool-coat is available in 20kg & 200 kg pails/bucket .

store containers in a clean dry area protected from direct sunlight and extreme heat and cold . Unopened containers can be store for 12 months.

Additional Information:

Approx. Rs 165 / Square InchGet Latest Price

CLEXOKRYST-SEAL is crystalline waterproofing slurry for concrete substrates. It is a single component unique reactive chemical treatment for the waterproofing, protection and repair of concrete. CLEXOKRYST-SEAL seal cures a lot faster than the current standard products eliminating the need for days of water curing and protection.

• Good resistance against aggressive media with a PH range of 3-12 and against soft water with low ion content.
• Shrinkage compensated, no spider-web cracking.
• Can be applied on damp surface.
• Does not require sealing lapping, and finishing of seams at corners, edges or between membranes.
• Becomes an integral part of the substrate.
• Self-healing properties of up to 0.3-0.4 mm static cracks.
• Non-toxic.
• Potable water approved.
• Good sulphate resistance.

• Waterproofing of basements and below grade parking structures.
• Suitable for horizontal and vertical walls.
• Waterproofing of portable water structure.
• Protection of damp and spill-ways.
• Waterproofing of elevator pits.
• Slab waterproofing (dry shake application).
• Waterproofing of Sewage structures, foundations, tunnels and subway systems.

As with all chemicals, caution should always be exercised. avoid prolonged contact with eyes and skin.

Protective clothing such as gloves and goggles should be worn. See the relevant material safety data sheet for more information.

CLEXOKRYST-SEAL is available in 20kg & 25 Kg PP/Paper bags.

Shelf life is 12 months in unpinned container. store containers in a clean dry area protected from direct Sunlight and extreme heat and cold.

Additional Information:

Approx. Rs 140 / KgGet Latest Price

• CLEXOLATEX-SBR is a multipurpose & economical products, easy to use.
• It prevents cracking by improving flexural strength.
• Reduces drying & aging shrinkage cracks.
• As a bonding agent for old to new concrete.
• It can be used for making of cement based waterproofing slurry that is flexible and can be used as coating for control of efflorescence.
• It can be used for the protection of concrete against corrosion, salt attacks, etc.

• As bonding agent for plaster, concreting (old to new), stucco and cement slurry bond coat.
• Suitable for general concrete repairs as concrete admixture. It gives excellent bond strength.
• For waterproofing can be used of basements, bridge decks, water tank, toilet, terraces, roofs swimming pools, etc.

As with all chemicals, caution should always be exercised. avoid prolonged contact with eyes and skin.

Protective clothing such as gloves and goggles should be worn. See the relevant material safety data sheet for more information.

CLEXOLATEX-SBR is available in 20kg & 200Kg buckets/pails/drum.

Shelf life is 12 months in unpinned container. store containers in a clean dry area protected from direct Sunlight and extreme heat and cold.

Additional Information:

Approx. Rs 85 / KgGet Latest Price

A Joint Sealing Compound must display good adhesion towards concrete and have the ability to withstand extension without cracking. It must also have a low susceptibility to flow during hot weather conditions. It should be durable and plastic, and at the time offer resistance to ingress of solid foreign matter. The filling up of joints with expansion joint filler itself is not enough to prevent the ingress of water. The top surface of the joints-construction, dummy as well as expansion joints are sealed with material which is waterproof as well as weather resistant.

        It has two grades such as CLEXODAM-SEAL GRADE-A & CLEXODAM-SEAL GRADE-B.

Approx. Rs 260 / KgGet Latest Price

CLEXOCLEAR-COATOVERVIEW
CLEXOCLEAR-COAT is an elastic, transparent acrylic UV TRP that provides resistance to weathering, and foot traffic and offers UV and weathering properties. They give glossy finish with enhance the color of the substrate. It waterproofs the concrete and other absorbent very effectively.
PROPERTIES

Excellent coating for exterior brick tiles, dhollpur marble and other stones.

Crack bridging ability.

Clear transparent coating.

Easy to apply.

Elastic coating.

Glossy finish.

Waterproofing properties.

Block all the pores, prevent water penetration through capillary action.

AREAS OF USE

CLEXOCLEAR-COAT is a excellent waterproofer for: Terraces, Roofs, Parapet walls, Wood, Exterior and interior walls etc.

Waterproofing of all types tiles like mosaic, dhollpur and marbles chips tiles where the aesthetic color value restention is of prime importance.

An as anti-corrosive primer for metal surface, steel structures, G.I sheets, Pipes, Machinery etc.

HEALTH & SAFETY
As with all chemicals, caution should always be exercised. avoid prolonged contact with eyes and skin.
Protective clothing such as gloves and goggles should be worn. See the relevant material safety data sheet for more information.
PACKING & STORAGE
CLEXOCLEAR-COAT is available in 20kg plastic pails.
Shelf life is 12 months in unpinned container. store containers in a clean dry area protected from direct Sunlight and extreme heat and cold.

Additional Information:

Approx. Rs 210 / KgGet Latest Price

Additional Information:

Approx. Rs 200 / KgGet Latest Price

Additional Information:

Approx. Rs 35 / sq ftGet Latest Price

Additional Information:

Approx. Rs 160 / KgGet Latest Price

CLEXOPU-PRIME is a clear/black, single pack, moisture cure polyurethane coating. Clexopu-prime is a single component adhesion promoter primer and sealer for us where toughness, chemical resistance, fast curing, and printability are required.

• no mixing or heating required. Save labour coat.
• fast drying, easy to apply by brush, spray or rollers and high flexibility.
• structure life and durability is increased.
• leading to early completion and time saving.
• excellent bonding.
• chemical resistance.
• multipurpose uses.

clexopu-prime is used before clexopu-lck coating on the following structure.

• clexopu-prime is applied for waterproofing of roof slabs, terraces, balconies, patios.
• waterproofing under terrazzo or tiles floors.
• waterproofing of foundation, basements, lift pits.
• sewage work and sunken portions.
• tunnels and subway system.
• parking garages, shopping mall, plaza areas, bridge decks.

as with all chemicals, caution should always be exercised. Avoid prolonged contact with eyes and skin. Protective clothing such as gloves and goggles should be worn. See the relevant material safety data sheet for more information.

clexopu-prime is available in 5kg & 20kg plastic pails.

shelf life is 12 months in unpinned container. Store containers in a clean dry area protected from direct sunlight and extreme heat and cold.

Additional Information:

Approx. Rs 200 / KgGet Latest Price

CLEXOPU-LCK is a single component liquid applied coating. CLEXOPU-LCK is high performance, applied hybrid polyurethane modified bituminous elastomeric waterproofing membrane. CLEXOPU-LCK when applied on a surface, gives a continuous monolithic film which is rubbery and elastic in nature.
PROPERTIES

Single Component, Cold Applied and Highly Elongation Rubber like Membrane.

No mixing or heating required. Save labour coat.

Fast drying, easy to apply by brush, spray or rollers and High flexibility.

Ensures durable bond & resists peeling, and chipping hence lasts longer.

Excellent crack bridging capacity.

Structure life and durability is increased.

Leading to early completion and time saving.

Lightweight coating with joint free seal.

Very good bonding to damp surfaces.

Excellent bonding to substrate such as concrete, masonry, wood, metal, plastic, etc.

AREAS OF USE
The high elasticity, excellent bond strength with concrete and other substrates, low water permeability of CLEXOPU-LCK makes it ideal membrane coating for a wide range of water/ vapour proofing application such as:

CLEXOPU-LCK is applied for waterproofing of roof slabs, terraces, balconies, patios.

Waterproofing under terrazzo or tiles floors.

Waterproofing of foundation, basements, lift pits.

Sewage work and sunken portions.

Tunnels and subway system.

Parking garages, shopping mall, plaza areas, bridge decks.

HEALTH & SAFETY
As with all chemicals, caution should always be exercised. avoid prolonged contact with eyes and skin. Protective clothing such as gloves and goggles should be worn. See the relevant material safety data sheet for more information.
PACKING & STORAGE
CLEXOPU-LCK is available in 5kg & 20kg plastic pails.
Shelf life is 12 months in unpinned container. store containers in a clean dry area protected from direct Sunlight and extreme heat and cold.

Additional Information: